STRUCTURAL FRAME: Vertical and horizontal intermediate framing members to be extruded .125″ wall aluminum tube, reinforced, and mechanically fastened with concealed zinc galvanized fasteners. Corner posts and roof perimeter to be quarter round shaped .090 walls as indicated on the drawings.

WALL PANELS: (If applicable) In-fill panels comprising the wall structure shall be of .063 aluminum sheet exterior and exterior, with 1″ rigid insulation between cavity.

FINISH: All exposed surfaces shall be fade and graffiti resistant DuPont IMRON Polyurethane Enamel, two coats, over heavy-duty industrial primer. One finish color shall be selected by the architect/owner. Multi-color paint available as an option.

INSULATION: Wall and door panels (if applicable) insulated with 1″ rigid polyurethane (R-7)

ROOF: Shall be 1-1/2″ thick composite roof panel with white .032 pre-finished aluminum sheet top and bottom and rigid insulation (R-9) between cavity. Optional roof to be 1/8″ clear acrylic dome, heat formed and mechanically fastened to roof frame.

DOORS: (if applicable) 1-1/2″ thick aluminum tube (.125″ wall), fully weather-stripped, top-hung sliding door(s) with commercial grade mortise type hook bolt locking device. Fixed window provided in upper half of door.

ANCHORING: Pre drilled steel anchoring points shall be provided for anchorage to concrete slab with wedge-type anchors.

GLAZING: All wall and door panels shall be glazed with 1/4″ tempered safety glass set in extruded aluminum frames. Glazing shall be specified clear, gray or bronze tint.

ELECTRICAL: (Optional) All wiring to meet NEC standards; all components to be UL listed. Light fixtures/air conditioning /heat/exhaust fans provided as required as optional accessories.

INSTALLATION: Anchoring system complete per final accepted shop drawings and in full accordance with the manufacturer’s specifications and instructions. Minor adjustments to the shelter may be required at time of installation, due to possible variances and irregularities in poured concrete slab. Electrical rough-in in concrete slab to be coordinated with the shelter manufacturer