Steel Shelters

STRUCTURAL FRAME: 14 gauge galvanized steel (conforming to ASTM A 500, Grade B) tubular uni-frame, all joints welded. All exposed welds ground smooth.

FINISH: All steel surfaces treated with one coat high build rust-inhibitive industrial primer. Finished with two coats industrial polyurethane enamel; paint to be salt, chemical and graffiti-resistant. Choice of one color by owner/architect.

ROOF: 3″ thick insulated (R-19) roof panel with white .032 pre-finished, stucco embossed aluminum sheet top and bottom. Roof to have 3″ standard overhang on all four sides with 8″ high aluminum fascia. Includes scuppers at rear of shelter (quantity varies depending on size of shelter) for water runoff. Roof sealed with weatherproof caulk, elastomeric membrane and coating.

DOOR: (Optional) Heavy-duty sliding door, top-suspended, with high security mortise-type hook-bolt lock. Door to be fully weather-stripped. Vision window provided in upper half of door utilizing 1/4″ tempered safety glass.

ANCHORING: Pre drilled steel anchoring boots included.

GLAZING: ¼” tempered safety glass set in aluminum frame glazing sash with interior portion installed with mechanical fasteners, exterior portion to snap in place. Exposed fasteners are unacceptable. Glazing must be easily removable and replaceable without disassembly of the framing system or any other part of the shelter.

ELECTRICAL: (Optional) All wiring to meet NEC standards; all components to be UL listed. Light fixtures/air conditioning /heat/exhaust fans provided as required as optional accessories.

INSTALLATION: Set on concrete pad, level and anchor with wedge anchors. If applicable, connect to incoming electrical service.